Baler Maintenance
Maintenance of balers
Maintenance and lubrication packer: the machine maintenance and lubrication best to a regular basis. First of all pay attention to maintaining the machine dry. can not let it rain, or water placed on top of things.
(1) within the machine once a week with debris or dirt removal.
(2) once a month mentioned in the previous section with the knife and slide over the top of the knife before the cleaning and maintenance lubrication do it again.
(3) every three months in addition to the above two after the maintenance done, then all the (axis, center) and the bearing was add a little oil.
(4) every two years to add the oil inside the gear wheel.
(5) should be noted that several parts can not fuel: a sent back with the wheel. b all the belt. c skid plates and around.
(6) per refueling, do not add too much, to avoid micro-switch failure caused by oil immersion.
Online